That was the fault of Pratt Read, not Lester.

For spinets, they were pretty good quality, other than the problem with the plastic parts. Earlier ones would have had ivory keytops with separate fronts and backs, and later ones had one-piece tops, with separate fronts. A thorough examination is required to locate each pianos individual serial number. I think some Betsy Ross spinets had waterfall keys, but most did not. We have also seen serial numbers of grand pianos stamped into the lyre assembly and nowhere else. Some serial numbers are printed on the back board of vertical pianos and require you to move the piano out from the wall. Do not rely on the name that is printed on the fall board as this does not guarantee the name of the manufacturer. There are seven examples but your serial number placement could be in yet a different location and may require some searching.īe sure to find the manufacturer’s name stamped on the cast iron plate or in the wood. Grand piano serial numbers are placed in many areas as the photos show. Other upright serial numbers are located on the cast iron plate but placed above the treble string section.ģ. Piano serial number of uprights are many times located on the inside of the piano stamped onto the plate between the bass string section and the treble string section.Ģ. The areas to look for these numbers vary from each company but here are some common places to look along with some photos.ġ. Using this number, along with the manufacturer, the age of the piano can sometimes be determined. Many pianos will have a 4, 5 or 6 digit serial number to identify the age of the piano. Pianos also have other numbers printed on them such as part numbers and many other pianos do not have a serial number at all. This may work out to more people than are strictly needed, but extra personnel can help in other ways (such as opening doors), and can step in should somebody start to get worn out.Many piano manufacturers placed serial numbers in a variety of places. government agency responsible for setting and enforcing workplace safety standards Go to source is recommended for this and all upright piano moves. For safety reasons, one person per 100 pounds X Trustworthy Source US Occupational Safety and Health Administration U.S.If the piano is being moved out of the house to a moving truck, have the truck open and any moving ramps deployed in advance of the move, and plan to move the piano before any other, lighter furniture so that there is plenty of room for your team to maneuver it into place.Using a tape measure, ensure that the spinet will fit through every door or opening you plan to move it through.Have a clear route from start to finish in mind before you begin to move the piano, and communicate it to everyone who is helping you move.

Lester betsy ross spinet value